Adhesive Plate Hanger
The original invisible Adhesive Disc Plate Hanger, tested and proven for more than 40 years. Its the Invisible answer to ugly plate wires. No clips or hooks. The Disc Plate Hanger sticks to the back of the plate, holds it flat and secure against the wall and cannot be seen.M012-50 is 50mm Diameter.
M012-75 is 75mm Diameter
M012-100 is 100mm Diameter
M012-140 is 140mm Diameter
EASY TO USE: First clean the plate, (even if the plate is new, as surface contamination may inhibit adhesion). Wet the adhesive side of the disc and slowly agitate with your finger to activate the glue. When the glue becomes "tacky" apply the disc to the back of the plate (ensure the hook is in the correct position for plate design). Press down firmly. Leave to dry overnight before thoroughly testing strength of adhesion. Hang your plate on wall and admire!
The Disc removes completely in warm water and will not remove back stamps, glazes, or any other markings.
We Also Recommend